IBC Accessories
Everything you need to maintain, repair, adapt, and enhance your IBC totes. From replacement valves and gaskets to heating blankets, mixers, and pallet bases — all in stock at our Baltimore warehouse.
Get a Free Quote
Tell us what you need — we respond within 24 hours.
Valves
2" Butterfly Valve
Standard replacement butterfly valve with polypropylene body and EPDM seal. Compatible with most HDPE IBC totes. Quarter-turn open/close.
2" Ball Valve
Heavy-duty ball valve for higher flow rates and thicker liquids. Stainless steel ball with PTFE seats. Full port design for unrestricted flow.
2" Camlock Adapter
Cam-and-groove quick-connect valve for fast hookup to hoses and pumps. Available in polypropylene, aluminum, and stainless steel.
3" High-Flow Valve
Oversized discharge valve for viscous products or gravity-feed applications. Requires adapter ring for standard 2" IBC opening.
Caps & Lids
6" Screw Cap
Standard 150mm screw cap with integrated gasket. Vented or solid options. Replaces worn or damaged fill caps on most IBC totes.
8" Screw Cap
Larger 225mm fill cap for IBCs with wide-mouth openings. Allows easier filling and cleaning access.
Tamper-Evident Cap
Screw cap with breakable tamper-evident band. Provides visual confirmation that the container hasn't been opened since filling.
Vented Breather Cap
Pressure-relief cap that allows air exchange during dispensing without removing the main lid. Prevents vacuum lock during drainage.
Adapters & Fittings
S60x6 to Garden Hose Adapter
Connects standard IBC valve outlet to a 3/4" garden hose thread. Perfect for gravity-fed irrigation and garden watering systems.
2" NPT to Camlock
Thread-on adapter that converts a standard NPT valve connection to a quick-connect camlock fitting. Available in Type A through F.
IBC-to-IBC Connector
Links two IBC totes together at the bottom valve for combined capacity or gravity cascade systems. Includes shut-off valve.
Reducer Fittings
Reduce from 2" to 1", 3/4", or 1/2" connections. Polypropylene or stainless steel. Useful for connecting to smaller diameter tubing.
Gaskets & Seals
EPDM Valve Gasket
Standard ethylene propylene gasket for butterfly and ball valves. Chemical-resistant, temperature range -40°F to 250°F.
Buna-N Valve Gasket
Nitrile rubber gasket for petroleum-based products and oils. Excellent fuel resistance. Temperature range -20°F to 200°F.
PTFE Gasket
Chemically inert PTFE gasket for aggressive chemicals and solvents. FDA-compliant for food contact. Widest chemical compatibility.
Lid O-Ring Kit
Replacement O-ring set for 6" and 8" screw caps. Includes EPDM and silicone options. Restores a watertight seal on older lids.
Heating & Temperature Control
IBC Heating Blanket
Wrap-around electric heating blanket that maintains liquid temperature in cold environments. Thermostat-controlled, 120V or 240V options. Prevents freezing and maintains viscosity.
Insulation Jacket
Non-electric thermal insulation wrap that slows heat loss. Ideal for temperature-sensitive products stored outdoors. Removable and reusable.
Immersion Heater
Submersible heating element inserted through the top fill opening. Direct-contact heating for rapid temperature recovery. Thermostat included.
Mixers & Agitators
Top-Mount Drum Mixer
Electric mixer that clamps to the IBC fill opening. Stainless steel impeller keeps contents blended and prevents settling. 1/3 HP motor.
Air-Powered Agitator
Pneumatic mixer for hazardous environments where electric motors aren't permitted. Explosion-proof rated. Adjustable speed.
Recirculation Pump Kit
Bottom-discharge pump that recirculates contents through the top opening. Keeps suspensions mixed without a mechanical agitator.
Pallet Replacements
Wooden Pallet Base
Standard 48" x 40" hardwood pallet replacement. Four-way forklift entry. Heat-treated and ISPM-15 stamped for international shipping.
Steel Pallet Base
Galvanized steel pallet for extended service life. Integrated spill containment lip. Won't rot or degrade in wet environments.
HDPE Composite Pallet
Lightweight, washable plastic pallet that won't absorb liquids or harbor bacteria. FDA-compliant for food-contact applications.
Replacement Parts
Cage Corner Protectors
Snap-on HDPE corner guards that protect the IBC bottle during transport and stacking. Prevents cage bars from denting the bottle at corner contact points.
Cage Repair Bars
Pre-cut galvanized steel replacement bars for damaged IBC cages. Includes mounting hardware for bolt-on or weld-on installation. Standard and metric sizes.
Discharge Spout Screen
Stainless steel mesh screen that installs inside the discharge valve to filter debris, sediment, and particulates during dispensing. 40-mesh standard, 80-mesh available.
Dust Cap for Discharge
Protective cap that covers the discharge valve outlet when the IBC is in storage. Prevents contamination from dust, insects, and debris. Polypropylene with silicone seal.
Forklift Guide Rails
Bolt-on steel guide rails for IBC pallets that prevent fork tine damage to the bottle during loading. Essential for operations using inexperienced forklift operators.
Replacement Cage Bolts Kit
Complete hardware kit with all bolts, nuts, and washers needed to reattach an IBC bottle to its cage frame. Stainless steel for corrosion resistance. Fits most major brands.
Safety & Containment
IBC Spill Containment Pallet
Single-IBC polyethylene containment pallet with 275-gallon sump capacity. Meets EPA and SPCC requirements for secondary containment of hazardous liquids. Grated deck, removable.
Double IBC Containment Pallet
Side-by-side containment pallet for two IBC totes. 550-gallon sump holds the full contents of one IBC in case of catastrophic failure. Built-in drain plug for rainwater removal.
IBC Cover / UV Shield
Heavy-duty opaque cover that protects outdoor IBCs from UV degradation, algae growth, and temperature fluctuation. Available in black, white, or insulated versions.
Anti-Static Grounding Kit
Grounding cable and clamp system for safe dispensing of flammable liquids from HDPE IBCs. Connects the cage to an approved ground point to prevent static discharge.
Choosing the Right Valve Type
The discharge valve is the most-used component on any IBC tote. Choosing the right type affects flow rate, ease of use, and chemical compatibility.
See the Difference Up Close
Our warehouse stocks every major valve type in multiple materials. Whether you need a simple butterfly valve replacement or an upgrade to a full-port stainless steel ball valve, we have the right part on the shelf. Not sure which valve fits your IBC? Bring it by or send a photo and we will match it perfectly.
Butterfly Valve
The standard valve shipped on most new HDPE IBCs. A rotating disc inside the valve body controls flow with a quarter-turn handle. Lightweight, inexpensive, and easy to operate.
- Lowest cost replacement option
- Quarter-turn operation — fast open/close
- Compact design — minimal protrusion
- Good for water, soaps, and thin liquids
- Not full port — disc restricts flow slightly
- Not ideal for thick or viscous liquids
- EPDM seal may degrade with certain solvents
Ball Valve
A heavy-duty upgrade that uses a rotating ball with a bore hole to control flow. Full-port design means zero flow restriction when open. Available in polypropylene or stainless steel.
- Full port — unrestricted flow when open
- Handles viscous liquids (oils, syrups, resins)
- Stainless steel option for aggressive chemicals
- Longer service life than butterfly valves
- Higher cost than butterfly valves
- Slightly more handle protrusion
- Heavier — adds weight to the discharge area
Camlock (Cam & Groove)
Quick-connect valve system that snaps together with cam arms — no threading required. Allows rapid connection to hoses, pumps, and transfer equipment. Available in PP, aluminum, and stainless steel.
- Fastest connection — seconds to attach/detach
- Leak-proof seal with proper gasket
- Industry standard for pump connections
- Available in multiple materials
- Requires matching camlock fitting on hose/pump
- Not as tight a seal as threaded connections
- More expensive than standard butterfly
Adapter Compatibility Chart
IBC totes use several different thread standards depending on the manufacturer and region. Use this chart to find the right adapter.
| IBC Thread Type | Common On | To Garden Hose | To Camlock | To NPT Pipe |
|---|---|---|---|---|
| S60x6 (60mm coarse) | Schutz, most EU IBCs | S60x6 to 3/4" GHT | S60x6 to 2" Camlock Type A | S60x6 to 2" NPT Male |
| 2" NPS / NPT | US-made IBCs, Mauser | 2" NPT to 3/4" GHT | 2" NPT to 2" Camlock Type A | Direct — native thread |
| 2" BSP (British) | UK and some EU IBCs | 2" BSP to 3/4" GHT | 2" BSP to 2" Camlock Type A | 2" BSP to 2" NPT |
| DN50 (DIN) | German industrial IBCs | DN50 to 3/4" GHT | DN50 to 2" Camlock Type A | DN50 to 2" NPT |
| 2" Tri-Clamp | Stainless steel IBCs | TC to 3/4" GHT (via NPT) | TC to 2" Camlock | TC to 2" NPT adapter |
Not sure which thread your IBC has? Send us a photo of the valve outlet and we’ll identify the thread type and recommend the right adapter. We stock all combinations listed above.
Heating Blanket Specifications & Use Cases
IBC heating blankets are essential for cold-climate storage and temperature-sensitive products. Here’s a detailed comparison of our heating solutions.
Standard Wrap Blanket
1,440W (120V) or 2,880W (240V)Ambient to 160°F (71°C)
- Wraps around the full circumference of the IBC
- Adjustable thermostat with 10°F increments
- Insulated outer layer retains heat
- Ground fault protection (GFCI) built-in
- Heavy-duty Velcro straps for secure fit
- ETL/UL listed for safety compliance
Freeze prevention, maintaining viscosity of oils and resins, warming honey and syrups for easier dispensing
Full-Coverage Insulated Blanket
2,000W (120V) or 4,000W (240V)Ambient to 200°F (93°C)
- Covers top, sides, and bottom of IBC
- Digital thermostat with 1°F precision
- Two independent heating zones (top/bottom)
- 2-inch closed-cell foam insulation
- Zippered access to valve and fill port
- CSA and CE certified
Chemical process temperature maintenance, melting solidified products, outdoor storage in sub-zero temperatures
Immersion Heater System
1,500W (120V)Ambient to 180°F (82°C)
- Stainless steel heating element
- Inserts through the fill opening
- Direct-contact for fastest heat transfer
- Adjustable thermostat with auto-shutoff
- Includes mounting bracket and cord
- Best for rapid temperature recovery
Quick heating of cold contents, spot heating for dispensing, backup heating when blankets aren't feasible
Most Popular Accessories by Industry
Different industries tend to need different accessories. Here’s what our customers in each sector order most frequently.
Agriculture & Farming
- S60x6 to Garden Hose Adapter
- IBC-to-IBC Connector
- IBC UV Shield Cover
- Vented Breather Cap
Food & Beverage
- PTFE Gasket (FDA-compliant)
- Tamper-Evident Cap
- Stainless Steel Ball Valve
- Discharge Spout Screen
Chemical Manufacturing
- Buna-N Valve Gasket
- Anti-Static Grounding Kit
- IBC Spill Containment Pallet
- 2" Ball Valve (SS)
Construction
- 2" Camlock Adapter
- Dust Cap for Discharge
- Wooden Pallet Replacement
- Standard Heating Blanket
Homesteading & Garden
- Garden Hose Adapter
- IBC UV Shield Cover
- Vented Breather Cap
- Reducer Fittings (3/4")
Automotive & Fleet
- 2" Ball Valve (PP)
- Buna-N Valve Gasket
- Discharge Spout Screen
- Double IBC Containment Pallet
Ordering for a Fleet of IBC Totes?
We offer volume pricing on all accessories. Whether you need 50 replacement valves, 200 gaskets, or heating blankets for an entire warehouse — contact us for bulk rates.
Get Bulk PricingNot Sure Which Part You Need?
Send us a photo of your IBC tote or describe the issue and we’ll identify the exact replacement part. Our team has worked with every major IBC brand and model.